Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key may be worried about the expense and inconvenience to replace it. You can cut down on these expenses by making your key fob yourself.
You'll require a phillips screwdriver with a flat head to do this. Insert the flathead screwdriver in the slot that is located in the middle of the case and then slowly lift it.
Cost
Some used cars come with only one key, and the majority of SAABs come with two keys. In this case the owner needs to purchase an additional key, and this is costly. There are saab key replacement near me to cut costs in this process. If you only need to replace the key fob case and not the emergency key or badge You can save money by buying a used case at a dealership. But, be aware that these cases don't contain the badge or emergency key and are prone to wear out very quickly.
In addition to the cost of a new key, you must also pay for the installation and programming of the TWICE module. These costs can quickly add up particularly if you do not have a spare.
For this reason, it is vital to have at least two keys for your car. If you lose your only key, you won't be stranded with no transportation.
The good news is that adding another key to your Saab 9-3 is not so difficult as it could seem. The only problem is that you'll need to pair the key with your car's computers. This can be accomplished by a dealer but it may take some time to set up an appointment. You can find all the information you require on the internet to guide you through the procedure.
Installation
Most Saab cars built since 1995 come with a special immobilizer system that makes use of an electronic key fob to control the engine of the car. This system also controls door locks and remotes for the vehicle. It is crucial to keep an extra key to avoid losing your original key and having your vehicle taken. The good news is that if you lose your only working Saab key there are ways to replace it without the need to pay for the expense of a dealer service.
The first step is to make the new key fob. To do this, you will need an open-ended screwdriver to remove the case. You just need to insert the screwdriver into a small slot in the middle of the case and slowly work it. If you're having trouble, try using different angles. After you've opened up the case, you can remove the electronics and place them in a new case.
Once you have the replacement fob and the key, you are able to begin the programing process. You will need to connect your Tech2 to the computer and follow the steps for NG 9-3 with or without transponders. It is recommended to replace the device TWICE, which is coupled to the correct key and transponder. It is possible to find this unit on the internet. However, you must make sure that it is an OEM replacement.
Programming
In general, adding an additional key for the Saab 9-3 will require the use of a specific tool known as Tech 2. Tech 2. It also requires programming the vehicle to recognize the new key. This is a far more complex process than just copying a key made of metal. It must be done by professionals to avoid damaging the electronic system of the vehicle. It is recommended to insert a spare car key as soon as you can. If you put off, it could cost much more in the future.
You'll also need to replace either the CIM or TWICE modules. This is usually a mail-order procedure, and it's not something you can do with an aftermarket supplier. Based on the car model the price could be quite high.
There's a better alternative to the dealer who is charging you top dollar to replace your vehicle's computer. S.A. Locksmith & Security can re-program your Saab computer to prepare it for the new key. This will save you the expense of buying a new car computer. This service is quick and affordable, as well as simple. You will save as much as 50% off the price dealers would charge you. This is a great solution for people who have lost their car keys.
Remotes
The Saab 9-3 Viggen is one of the most unique vehicles ever to sport the Saab badge. It was a Scandinavian, front-drive, fighter jet-inspired monster that was incredibly fast and fun to drive. Although many other Saab models were built after it, very few were as unique.
It's crucial to change your Saab 9-3 key fob in the event that you lose it. Contrary to the more popular European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a special key to begin. If you have a spare, the process of replacing it is easy. But if you do not have one, it can be costly and time-consuming.
You could save money if purchase an old key fob replacement and have it programmed locally by a locksmith. Be careful when purchasing used keys from eBay or other online retailers. They might not be authentic, and you may pay more at the end.
Anyone can remove the electronic components and battery of an old key fob by using an inexpensive screwdriver with a flat head. Be cautious not to scratch any of the small electronic components inside the case. Be careful not to pour liquids into the case because this could cause damage. Also, avoid buying cloned keys from aftermarket sellers, as they may not have been connected to the CIM of the car you own.